Hammer Crusher

Detailed Product Description

Hammer Crusher is widely used in mining, cement, coal, metallurgic, construction material, road building, and Petroleum & Chemical industries. It is used for grinding the medium-hard materials. The material will be grinded by the striking between high-speed hammer and material. It possesses qualities of simple structure, large reduction ratio, and high-efficiency. Both Dry and Wet Process are available.

Hammer Crusher Operating principle:
The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk, pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than the screen mesh will be screened out and others are left to be further hammered and ground until reach the standard size. The size of the final product can be adjusted by changing the screening plate. The gap between the rotors and the screening plate can also be adjusted according to different requirement.

Hammer Crusher Specification:

Model	Rotor dia. (mm)	Rotor Working Length (mm)	Rotor Speed (r/mm)	Input Size (mm)	Output size (mm)	Capacity (t/h)	Power (Kw)	Out  size	Weight
PC400×300	400	300	1200	≤80	≤10	5-8	11	812×982×758	0.7
PC600×400	600	400	1000	≤100	≤15	10-15	18.5	1200×1114×1114	1.5
PC800×600	800	600	980	≤120	≤15	20-25	55	2620×1864×1340	3.7
PC1000×800	1000	800	980	≤200	≤45	34-54	115	3574×2250×1515	6.5
PCF1609	1680	918	650	≤600	≤25	50-70	110		24
PCF2014	2000	1400	600	≤1200	≤25	150-200	315		49
PCF2724	2750	2450	500	≤1800	≤25	600-800	1100		127

TJ